Mohan M. and Chandra S. (2020). “Influence of Major Stream Composition on Critical Gap at Two-Way Stop-Controlled Intersections - A Case Study” Transportation Letters: the International Journal of Transportation Research, 12(1), 1-8 [Impact Factor: 1.500].
Chakrabarty N., Singh Assi G., Kumar S, Gupta K and Haritha P C (2020). “Influence of Music on Sensorimotor Coordination and Concentration among the drivers in an Indian city”, Indian Journal of Social Psychiatry, Vol. 36(1), ISSN 0971-9962, pp. 64-72. [ Impact Factor: 1.121]
Errampalli, M., Patil, K. S. and Prasad, C. S. R. K. (2020). "Evaluation of integration between public transportation modes by developing sustainability index in India", Journal of Case Studies of Transport Policy, Elsevier Publishers, 8 (1), 180-187. https://doi.org/10.1016/j.cstp.2018.09.005 [Impact Factor: 0.602]
Advani M., Gupta N. J., Velmurugan S., Errampalli, M and Chandra S. (2020) 'Defining and Analyzing Forceful Gap Behavior at Unsignalized Intersection", Transportation Research Board TRR: Journal of the Transportation Research Board, published online on 19 June 2020. https://doi.org/10.1177/0361198120925258 [Impact Factor: 0.695]
Kathuria, A., Parida, M., and Ravi Sekhar Ch. (2020). Travel-Time Variability Analysis of Bus Rapid Transit System Using GPS Data. Journal of Transportation Engineering, Part A: Systems, 146(6), 05020003. [Impact Factor: 0.740]
Kumar, P. P., Ravi Sekhar, Ch, and Parida, M. (2020). Identification of neighborhood typology for potential transit-oriented development. Transportation Research Part D: Transport and Environment, 78, 102186. [Impact Factor: 4.051]
Panigrahi R.K.and Dhiman G. (2020) Critical review of different types of remedial measures for landslides, Vol.48(3),pp.38-45, Indian Highways Journal, Indian Road Congress, New Delhi
Jangpangi L. and Kumar B. (2020), “Identification of Full Depth Cracks in Concrete by Ultrasonic Pulse Velocity”, Indian Highways, Vol.48 (3), pp.15-20.
Yogeshwar V. Navandar; Dhamaniya A, Patel D. A. and Chandra S. (2019). “Traffic Flow Analysis at Manual Tollbooth Operation under Mixed Traffic Conditions” Transportation Research, Part A, Vol.145(6), DOI: 10.1061/JTEPBS.0000247. [Impact Factor: 3.693].
Singh, K., Mittal, S. and Kumar, K. (2019). “Vertical displacement reduction of cohesionless overburden soil by nails in box jacking”, International Journal of Geotechnical Engineering, pp. 1-13. DOI:10.1080/19386362.2019.1643521. [Impact Factor: 1.260].
Panigrahi R.K. and Dhiman G. (2019). “Design and Analysis of Soil Nailing Technique for remediation of landslides”, Vol.10(1), pp.24-32, Highway Research Journal, Indian Roads Congress, New Delhi
Vinoth M., Prasad P.S.and Guru Vittal U.K. (2019), “Performance Analysis of Plaxis Models of Stone Columns in Soft Marine Clay”, Indian Highways, Indian Roads Congress (IRC), New Delhi, Vol.47(10), pp.25 - 30
Kar, S.S, Nagabhushana, M.N., & Jain, P. K. (2019). “Performance of hot bituminous mixes admixed with blended synthetic fibers”, International Journal of Pavement Research and Technology, 12(4), 370-379, DOI: https://doi.org/10.1007/s42947-019-0044-x. [Impact Factor: 1.830].
Eleyedath, A., Kar, S.S., and Swamy, A.K. (2019) "Modelling of Expansion Ratio and Half-life of Foamed Bitumen using Gene Expression Programming." International Journal of Pavement Engineering, DOI: https://doi.org/10.1080/10298436.2019.1609675
Shukla M., Kanaujia V.K., Bhowmik P. and Chandra S. (2019) “Performance Observation of chemically stabilized soil for base and sub-base course in Maintenance of Flexible pavements”, Journal of Indian Roads Congress, Vol.80 (3), pp.29-37.
Deori, S., Choudhary, R., Tiwari, D. and Kumar, A., (2019), 'HDM-4 Deterioration Modelling: Validation and Adoption for Flexible Pavements with Modified Bituminous Road Surfacing', The Baltic Journal of Road and Bridge Engineering, DOI: https://doi.org/10.7250/ bjrbe.2019-14.440, Vol.14(2), pp. 208-226. [Impact Factor: 0.860]
Kumar, G., Sahoo, U. C., Rao, K. R., and Bose, S., (2019), “Design and evaluation of stone matrix asphalt using stiffer grade crumb rubber modified bitumen”, Roads and Bridges, Vol.18(2), pp.151-165.
Majhi R. C. and Velmurugan S. (2019). “Analyzing driver's response to yellow indication subjected to dilemma incursion under mixed traffic condition”, Journal of Traffic and Transportation Engineering (English Edition), December, 2019 https://doi.org/10.1016/j.jtte.2019.05.005, (Article in press-available online pp. 1 - 11).
P. Swarna Stefy Grace, Kumar S., Chakrabarty N. (2019) “Sensation Seeking and Peer Passenger Influence on Risky Driving among Novice Drivers in Udupi Taluk, India”, Clinical Epiodemology and global health, Available online 3 January 2020. https://doi.org/10.1016/j.cegh.2019.12.020.
Gupta N. and Ravi Sekhar, Ch. (2019). “Experimental Study for Estimation of Capacity of Exclusive Motor Cycle Lane in India” Journal of the Indian Roads Congress, 80(3),25-31
Patnala, P. K., Parida, M., and Ravi Sekhar Ch.(2019). “A Decision Framework for Defining TOD to an Indian city”, Journal of the Eastern Asia Society for Transportation Studies, 13, 384-396.
Kathuria, A., Rajendran, B. G., Parida, M., and Ravi Sekhar, Ch. (2019). “Examining Walk Access to BRT Stations: A Case Study of Ahmedabad BRTs. Institute of Transportation Engineers”. ITE Journal, 89(5), 43-49. [Impact Factor:0.155]
Kathuria, A., Parida, M., and Ravi Sekhar, Ch. (2019). “A Review of Service Reliability Measures for Public Transportation Systems”, International Journal of Intelligent Transportation Systems Research, 1-13. [Impact Factor: 1.38]Lincy, V., Rao, V.V.L.K .and Lakshmy, P. (2019). “Study on High-Volume Unprocessed Fly Ash Concrete with Colloidal Nanosilica under Chloride Exposure”, ACI Materials Journal, 116(4), 61-68, DOI: 10.14359/51716711. [Impact Factor:1.640]
Lakshmy P. (2019). “A study on Buffeting Response of Cable stayed Bridges with Different Deck Support Types Using Time Domain Approach”, The Bridge and Structural Engineer, Vol.49 (2), 1-9. [Impact Factor: 0.621]
Lincy, V., Rao, V.V.L.K.and Lakshmy, P. (2019). “Nanosilica Added Concrete: Strength and its Correlation with Time Dependent Properties”, Proceedings of the Institution of Civil Engineers-Construction Materials, ICE, 172(2), 85-94, DOI: 10.1680/jcoma.17.00031
Kaur, N., Dasari, M. and Singamsetty, S. (2019) “An experimental study on piezoelectric energy harvesting from wind and ambient structural vibrations for wireless structural health monitoring”, Advances in Structural Engineering, Vol. 23(5), pp. 1010-1023.[Impact Factor: 1.320]
Negi, P., Chhabra R, Kaur, N. and Bhalla S. (2019), “Health Monitoring of Reinforced Concrete Structures under Impact using Multiple Piezo-based Configurations”, Construction & Building Materials,Vol. 222, pp. 371-389 [Impact Factor: 4.419]
Kaur, N., Bhalla, S. and Maddu, S.C.G (2019) “Damage and retrofitting monitoring in reinforced concrete structures along with long-term strength and fatigue monitoring using embedded Lead Zirconate Titanate patches”, Journal of Intelligent Materials and Smart Structures, 30(1), 100-115.[ Impact Factor: 2.410]
Mehrotra, T; Shukla, A; Singh, R (2019). “In vitro toxicological evaluation of domestic effluent treated by formulated synthetic autochthonous bacterial consortium”, world Journal of Microbiology & Biotechnology. Vol. 35(12), Article number: 184 (2019).[Impact factor: 2.80]
Saha, A; Chandra, S; Ghosh, I, (2019). “Assessment of level of service for urban signalized intersections in India”, Current Science. Vol. 117(9), pp. 1516-1521. [Impact factor: 0.756]
Dave, SM; Joshi, GJ; Ravinder, K; Gore, N, (2019). “Data monitoring for the assessment of on-street parking demand in CBD areas of developing countries”, Transportation Research Part A-Policy and Practice, Vol. 126, pp.152-171.[Impact factor: 3.693]
Sharma, N; Kumar, PVP; Dhyani, R; Ravisekhar, C; Ravinder, K, (2019). “Idling fuel consumption and emissions of air pollutants at selected signalized intersections in Delhi”, Journal of Cleaner Production. Vol.212, pp.08-21 [Impact factor: 7.246]
Kuna, K; Gottumukkala, B, (2019). “Viscoelastic characterization of cold recycled bituminous mixtures”, Construction and Building Materials. Vol.199, pp.298-306. [Impact factor: 4.69]
Yadav, VB; Gadi, R; Kalra, S (2019). “Clay based nanocomposites for removal of heavy metals from water: A review”, Journal of Environmental Management. Vol.232, pp.803-817.[Impact factor: 4.175]
Minal, S; Sekhar, CR; Madhu, E, (2019). “Development of neuro-fuzzy-based multimodal mode choice model for commuter in Delhi”, IET Intelligent Transport Systems. Vol.13(2), pp.243-251.[Imact
Mithun Mohan and Satish Chandra (2018), “Critical gap estimation at two-way stop-controlled intersections based on occupancy time data”, Transportmetrica A: Transport Science, 14(4), 316–329. (IF = 2.25)
Mithun Mohan and Satish Chandra (2018), “Three methods of PCU estimation at Unsignalised intersections”, Transportation Letters: the International Journal of Transportation Research, 10(2), 68-74. (IF = 0.725)
Subhadip Biswas, Satish Chandra and Indrajit Ghosh (2018), “An advanced approach for estimation of PCU values on undivided urban roads under heterogeneous traffic conditions”, Transportation Letters: the International Journal of Transportation Research, published on line on December 25, 2018, https://doi.org/10.1080/19427867.2018.1563268
Mithun Mohan and Satish Chandra (2018), “Influence of Major Stream Composition on Critical Gap at Two-Way Stop-Controlled Intersections - A Case Study”,
Transportation Letters: the International Journal of Transportation Research, Published on line, June 20, 2018. (IF = 0.725).
Arpita Saha, Souvik Choudhary, Satish Chandra and Indrajit Ghosh (2018), “Kriging based saturation flow models for traffic conditions in Indian cities”, Transportation Research, Part A, 118, 38-51, https://doi.org/10.1016/j.tra.2018.08.037 .(IF = 3.02)
A. K. Bharti, , Ch. Ravisekhar, and Satish Chandra, (2018), “Modeling travel time of car with varying demand on an urban midblock section”, Journal of Intelligent Transportation Systems, 22(2), 99-105. (IF 2.164)
Satish Chandra and Mithun Mohan (2018), “Analysis of Driver Behaviour at Unsignalized Intersections”, Paper Number 675, Journal of Indian Roads Congress, 79(2), 5-10.
P. Negi, T. Chakraborty, N. Kaur and S. Bhalla (2018), “Investigations on Effectiveness of embedded PZT patches at varying orientations for monitoring concrete hydration using EMI technique”, Construction & Building Materials, 169 (Apr), 489-498. (IF 3.485)
S. Bhalla and N.Kaur (2018), “Prognosis of Low-Strain Fatigue Induced Damage in RC Structures using Embedded Piezo-Transducers as Global cum Local Vibration Sensors”, International Journal of Fatigue, 113, 98-112. (IF 3.132)
N.Kaur, S. Bhalla and S.C.G. Maddu, (2019) “Damage Detection, Retrofitting Assessment and Long Term Monitoring of Reinforced Concrete Structures using Embedded PZT Patches”, Journal of Intelligent Materials and Smart Structures, 30(1), 100-115. (IF 2.211)
Lincy Varghese, V.V.L.K. Rao and Lakshmy Parameswaran (2018), “A Study on Nanosilica and Microsilica added Concretes under Different Transport Mechanisms”, Concrete Research, Institute of Civil Engineers (UK), 70(23), 1205-1216.
Lincy Varghese, V.V.L.K. Rao and Lakshmy Parameswaran (2018), “Improvement of Early Age Strength of High Volume Siliceous Fly Ash Concrete with Nanosilica- A Review”, Advances in Civil Engineering Materials, ASTM International, 7(1), 599-615.
G. Bharath, Manoj Shukla, M.N. Nagabhushana, Satish Chandra and Amit Shaw (2019), “Laboratory and Field Evaluation of Cement Grouted Bituminous Mixes”, Road Materials and Pavement Design, https://doi.org/10.1080/ 14680629.2019. 1567375
Ambika Behl, S.S. Kar, M.N. Nagabhushan, Satish Chandra, Manoj Shukla (2018), “Application of Foam Bitumen in Asphalt Pavement Recycling: A Case Study”, Journal of the Indian Roads Congress, 79(2), 29-37.
S.S. Kar, A.K. Swamy, Devesh Tiwari and P.K. Jain (2018), “Impact of recycled asphalt pavement on properties of foamed bituminous mixtures”, Baltic Journal of Road and Bridge Engineering, 13(1), 14-22,https://doi.org/ 10.3846/ bjrbe. 2018. 383.
S.S. Kar, A.K. Swamy, Devesh Tiwari and P.K. Jain (2018), “Impact of low viscosity grade bitumen on foaming characteristics”, Journal of the South African Institution of Civil Engineering, 60(2), 40–52.
G. Bharath and M.A. Reddy (2018), “Estimation of Dynamic Modulus values of bituminous Mixes from Repeated Indirect Tensile Test”, Indian Highways, Indian Roads Congress, 46(7), 15-24.
K. Arora, A.Behl and P.K. Jain (2018) “Design Approach for Low Volume Rural Road Using Nano-materials Stabilized soil, Journal of ASTM: Advances in Civil Engineering Materials 7(2), 19-31, https://doi.org/10.1520/ACEM20170029.
A. K. Sinha, V. G. Havanagi and J.T. Shahu, (2019), "Construction and performance of jarofix waste material embankment", Proceedings of the Institution of Civil Engineers – Construction materials, https://doi.org/10.1680/jcoma.18.00003.m
A. K. Sinha, V. G. Havanagi and J.T. Shahu (2018), "Characterization of jarofix for usage in geotechnical projects", Proceedings of the Institution of Civil Engineers – Geotechnical Engineering, 171(5), 439–450.
G. S. Parvathi and P. K. Basudhar (2018), “Flexural response of beams on bisco-elastic foundations with predictions beyond the loading Area”, International Journal of Geotechnical Engineering, Taylor and Francis Group Publications, DOI: 10.1080/19386362.2018.1450700. (IF 0.31)
G. S. Parvathi, V. G. Havanagi, V.K. Kanaujia and A.K. Sinha (2018), "Ground Improvement for the Construction of Road over Soft Organic Soil: A Case Study", The Bridge and structural Engineer, 48 (2), 70-80.
G. S. Parvathi, A.K. Sinha and V. G. Havanagi (2019), “Red Mud - Fly Ash Mix as an Embankment Fill Material”, Indian Highways, Indian Roads Congress, 47(3), 20-25.
K. Singh, S. Mittal and K. Kumar, (2018), "Reduction in lateral displacement of cohesionless soil at Box tunnel face using nails in Overburden", International journal of Geosynthetics and Ground Engineering. 4(3), 21.
R.K. Panigrahi (2018), "Assessment of Rock slope Adjacent to Hill roadways", The Indian Mining & Engineering Journal, 57 (7), 12-17.
V.B Yadav, Sippy Kalra and Ranu Gadi, (2019), “Clay based nanocomposites for the removal of heavy metals from water: a review”, Journal of Environmental Management, 232, 803-817. (IF 4.45)
V.B. Yadav, Ranu Gadi and Sippy Kalra (2018), “Synthesis and characterization of novel nanocomposite by using kaolinite and carbon nanotubes”, Applied Clay Science, 155, 30-36. https://doi.org/10.1016/j.clay.2017.11.043.
A.M. Rao, S.Velmurugan and Satish Chandra (2018), “Impact of Road Safety Audit Implementation on Expressway”, Indian Highways, Indian Roads Congress, 46(11), 35 - 42.
Minal, K.K. Gajrani and Ch. Ravi Sekhar (2018),“Impact of road rationing on modal shift andtransport sustainability in Delhi, India”, Proceedings of the Institution of Civil Engineers-Transport, DOI: 10.1680/jtran.18.00023. (IF 0.4)
Minal, Ch. Ravi Sekhar and Errampalli Madhu, (2018), “Development of Neuro-Fuzzy based Multimodal Mode Choice Model for Commuter in Delhi”, IET Intelligent Transport Systems, DOI: 10.1049/iet-its.2018.5112. (IF 1.38)
P. Deepa, Laad Meena, Sangita and Rina Singh, (2019), "An overview of use of nnoadditives in enhancing the properties of pavement construction binder bitumen", World Journal of Engineering, https://doi.org/10.1108/WJE-04-2018-0136
P. Das, M. Parida, and V.K.Katiyar (2018), "Macroscopic Pedestrian Flow Modelling using Simulation Technique", International Journal for Traffic & Transport Engineering 8(2), 166-176, DOI:10.7708/ijtte.2018.8(2).02
E. Madhu, K.S. Patil and C.S.R.K. Prasad (2018), “Evaluation of integration between public transportation modes by developing sustainability index in India”, Journal of Case Studies of Transport Policy, Elsevier Publishers, September 2018, https://doi.org/10.1016/j.cstp.2018.09.005.
Shewta Gaur, Niraj Sharma, Rajni Dhyani and Anil Singh (2018), “Environmental Auditing as a Risk Management Tool: Case Study of an Automobile Axle Manufacturing Unit in India”, Environmental Engineering & Management Journal, 17(11):2695-2702. (IF 1.334)
Niraj Sharma, P.V. Pradeep Kumar, A. Singh, R. Dhyani, Ch. Ravisekhar and K. Ravinder (2019), “Measurement of Idling Fuel Consumption and Estimation of Emission at Selected Signalized Intersections in Delhi”, Journal of Cleaner Production, 212, 8-19. (IF= 5.651)
A.K. Bharti, Ch. Ravisekhar and Satish Chandra (2018), “Travel time reliability as a level of service measure for urban and inter-urban corridors in India”, Journal of Current Science, 114(9). ( IF 0.99)
Ankit Kathuria, Ch. Ravisekhar and M. Parida (2018), “Examining failure rate dynamics to estimate capacity of bus rapid transit system corridor”, Journal of Proceedings of the Institution of Civil Engineers-Transport, https://doi.org/10.1680/jtran.17.00161. ( IF 0.402)
P.K. Sarkar and Ch. Ravisekhar (2019), “Smart Transportation System Citing Best Practices and its Relevance in Indian Cities”, Indian Highways, Indian Roads Congress, 47(2), 23-31.
G.R.Bivina, Purnima Parida, Mukti Advani and M.Parida (2018), “Pedestrian Level of Service Model for Evaluating and Improving Sidewalks From Various Land uses", European Transport, issue 67, paper no. 2, ISSN 1825-3997.
T.R. Bagul, Kiran Patil, Alka Kote, B.S. Balpgold, Ravindra Kuma and Rakesh Kumar (2018), “Analysis of Autorickshaw as an Intermediate Paratransit system”, International Journal of Pure and Applied Mathematics, 118(24). https://www.scopus.com/sourceid/19700182690#tabs=0. (SCI 0.23)