- Home
- About us
- R&D Areas
- R&D Management Areas
- R&D Facilities
- Bridge Engineering and Structures Division »
- Mobile Bridge Inspection Unit
- Schmidt Rebound Hammer
- Pundit PL-200 Ultrasonic Pulse Velocity Tester
- VW Load Cells
- Strain Measuring System (Vibrating wire method)
- Structural Testing System
- Pile Integrity Tester (PIT)
- Strain Measurement System - DAQ
- Fourier Transform Infrared Spectroscopy (FTIR)
- Universal Testing Machine 5kN (UTM)
- Universal Testing Machine 2000kN (UTM)
- FFT Analyser
- Geotechnical Engineering Division »
- Flexible Pavements Division »
- Pavement EvaluationDivision »
- Rigid Pavements Division »
- Traffic Engineering and Safety Divsion »
- Transport Planning Division »
- Bump Integrator
- Dipstick Road Profiler
- Dynamic Heavy Testing
- Expansion Joint Testing
- Noise, Vibration & Harshness
- Roughometer
- Walking Profiler
- Wheel Weigh Pads
- Bridge Engineering and Structures Division »
- Publications
- HRD
- Events
- News
- Rajbhasha
- Tenders
Universal Testing Machine 5kN (UTM)
Instrument Details
Make | : | Shimadzu (Asia Pacific) Pvt. Ltd., Singapore | ||||||||||
Model | : | Autograph, AGS-J | ||||||||||
Specification | : | |||||||||||
|
Working Principles
It is fully automatic operated universal testing machine which realized ease-of-operation. It consist of high precision electronic control panel which incorporating control, optics, sensors and information processing. It is computer operated compatible Trapezium Software which provides simplified user operation with wizards and the industry premier navigation system. This machine is very useful to test any material which is subjected to tension and compression such as aluminum sheets, thin wire, rubber (neoprene seal). The Extensometer is used to measure the elongation of different type of the materials.
Applications
- Estimation of Tensile Strength, Yield Strength, Elongation Percentage of Ferrous and Non-ferrous metals.
- It is also used to measure the Compression Strength, Flexural Strength of plastic components and Peel off Strength between two different materials such as adhesion strength between the rubber part and steel strip.
User Instructions
- When the load cell is not mounted or applied force cannot be transmitted to the load cell, do not operate the machine to apply force to the cross head. If force is applied to the cross head in such conditions, over force cannot be deducted, causing the frame or jig to be damaged.
- Make sure the force applied between the crossyoke or crosshead do not exceed the allowable force range. Applying over force deforms the crossyoke, disabling the crosshead operation.
- Before operating the crosshead , be sure to the set up the crosshead stroke limit switch.
Contact Details
CSIR-Central Road Research Institute,
Delhi-Mathura Road, New Delhi-110025
Phone: 011-26832173, 26832325
Website: http://www.crridom.gov.in
Email: director.crri@nic.in
Instrument Usage Charges(Including GST)